Central PA 
Pressure Pro 115v HotLink Hot Water Generator S/CPHL5E1
Manufacturer Part Numbers: S/CPHL5E1
SKUs: S/CPHL5E1
SKUs: S/CPHL5E1
Package Dimensions:
Height: 0.00 Inches
Width: 0.00 Inches
Length: 0.00 Inches
Weight: 1 Lb(s) 0 Oz
Retail Price
Call 414-351-9274. Pricing too low to advertise!
Warning California Proposition 65 Detectable amount of chemicals known to the State of California to cause cancer, birth defects or other reproductive harm may be found in pressure washing equipment, accessories and exhaust. For More Information Visit www.p65warnings.ca.gov
**This item is not eligible for free shipping. You will be contacted shortly after this order to discuss freight shipping charges.
Similar Pressure Pro Units:
Pressure Pro 115v Hot Link Hot Water Generator SKID MOUNTED
115v, 1ph, 15amp (plug into a wall outlet or 2000w generator)
Would you like your cold water pressure washer to be capable of spraying hot water? Simply connect the Hot Link to your existing cold water pressure washer (up to 4350psi, up to 5gpm) with the included 4' connection hose and you have the hot water you need to wash away any grease and grime efficiently. The HotLink uses a diesel-fired burner and schedule 80 steel pipe coil with ceramic insulation to efficiently provide 200°F water. The HotLink is compact and rugged with a powder-coated steel base/frame and stainless steel enclosure.
Dimensions: 29"L x 22"W x 22"H
*FREIGHT NOT INCLUDED
Hot Link Hot Water Generator |
|
| MODEL NUMBER | CPHL5DC |
|---|---|
| PRESSURE | Connect to any cold water pressure washer up to 4350psi (300bar) |
| FLOW CAPACITY | Use your existing pressure washer, up to 5 gpm |
| 4gpm @ 100°F heat rise, up to 200°F | |
| VOLTS/AMPS | 12v DC - Connect to battery on pressure washer (requires 14amp charging system) |
| CONTROLS/SWITCHES | Adjustable thermostat, lighted on/off switch |
| PRESSURE CONTROL | Safety features include flow switch, pressure relief valve and burst disc |
| PRESSURE HOSE | Not included – your gun and hose must be rated for at least 200°F |
| GUN/WAND | Not included – your gun and hose must be rated for at least 200°F |
| JUMPER HOSE | Includes 48”, 5000psi, 250°F hose to connect Hot Link to existing pressure washer |
| BURNER COIL | ½” sch. 80 steel pipe, cold-rolled 4-spiral, ceramic insulation |
| CONSTRUCTION | Rugged, powder-coated base frame, stainless coil wrap, and double-wall coil end caps |
| BURNER FUEL/CAP | Diesel #2-, 3-gallon for burner |
| 274,400 Btu input | |
| MOUNTING | 4) Holes to bolt down to your truck or trailer |
| WEIGHT/DIMENSIONS | 180#, 29”l x 22”w x 22”h |
Related Categories
No videos to display at this time.