Midland, NC 
Radial High Flow Tube 150 ft - 3/8" OD
Manufacturer Part Numbers: 1-007A-00168
SKUs: 29-4201
SKUs: 29-4201
Package Dimensions:
Height: 12.00 Inches
Width: 12.00 Inches
Length: 12.00 Inches
Weight: 30 Lb(s) 0 Oz
MSRP
$225.00
Retail Price
$225.00
QTY:
Warning California Proposition 65 Detectable amount of chemicals known to the State of California to cause cancer, birth defects or other reproductive harm may be found in pressure washing equipment, accessories and exhaust. For More Information Visit www.p65warnings.ca.gov
SPECIFICATIONS:
RADIAL HI-FLO is 10mm (approx 3/8") OD tube.
REMEMBER : The longer the tube or hose, no matter the ID, the less flowrate will be available at the brush, so always use the shortest practical length, transporting water with the largest practical ID. Typically, stepping down the ID over distance preserves flowrate better (so use 150FT (50m) 5/8" (16mm), then 150FT (50m) 3/8" (10mm) over long distances).Our target is 1/2GPM (2LPM) at the RADIAL BRUSH.
HI-FLO PACK:
This pack is designed to give you the maximum flowrate through HI-FLO TUBE to your RADIAL brush.
If you choose 150FT, we give you another 10:10 PUSH-FIT ADAPTOR so you can cut HI-FLO into two lengths (eg. 75/75 or 100/50) and easily re-join them for longer run situations. Remember to reconnect and use the COLLAR LOCK CIR-CLIPS to avoid unintentional disconnection.
HI-FLO is designed for delivering more water to all RADIAL BRUSHES. We know categorically that you can USE LESS TIME by using more FLOW-RATE during the ON-GLASS-RINSE phase. Overall, if you accelerate your work at a higher rate than the increase in flow-rate, you will actually USE LESS WATER VOLUME.
You CAN use HI-FLO on a reel.
No specifications to display at this time.
Related Categories
No videos to display at this time.