General Pump Fully Plumbed 3.0gpm@2500psi #SLPTP2530-945
SKUs: SLPTP2530-945
Package Dimensions:
Height: 8.00 Inches
Width: 12.00 Inches
Length: 15.00 Inches
Weight: 35 Lb(s) 0 Oz
MSRP
$909.13
Retail Price
$491.07
QTY:
Warning California Proposition 65 Detectable amount of chemicals known to the State of California to cause cancer, birth defects or other reproductive harm may be found in pressure washing equipment, accessories and exhaust. For More Information Visit www.p65warnings.ca.gov
Adding this item to your cart will qualify your order for free shipping.
General Pump Assembly with Unloader and Plumbing
- General Pump model TP2530
- 3.0 GPM @ 2500 PSI
- 6.5 HP Engines
- With YVB Plumbing
- 3400 RPM
- 3/4" Gas Flange
- Forged brass manifold with an exclusive lifetime warranty
- New, over-sized connecting rods for ultimate crankcase performance
- Die-cast, anodized aluminum, oil-bath crankcase
- Solid ceramic plungers with continuously lubricated packings
GP - SLPTP2530-945 Specs | |
---|---|
Max Volume | 3 GPM |
Max Discharge Pressure | 2500 psi |
Max Pump Speed | 3400 rpm |
Max Inlet Pressure | 125 psi |
Max Inlet Vacuum | 3 ft water |
Bore | .591 in./15 mm |
Stroke | .283/7.2 mm |
Crankcase Capacity | 11.0 oz. |
Max Fluid Temp | 165° F |
Inlet Port Thread | 3/8-19 BSPP-F |
Unloader Inlet Port Thread | 1/2-14 BSPP-F |
Discharge Port Thread | 1/4-19 BSPP-F |
Unloader Discharge Port Thread | 3/8-19 BSPP-M |
Hollow Shaft | 3/4 in./19 mm |
Weight | 11.4 lbs. |
Dimensions | 7.0" x 7.2" x 5.5" |