Midland, NC 
HN Series Hydro Tek Stationary Hot Water 3.8@2500 #HN25004E3G
SKUs: HN25004E3G
Package Dimensions:
Height: 0.00 Inches
Width: 0.00 Inches
Length: 0.00 Inches
Weight: 0 Lb(s) 0 Oz
Retail Price
Call 414-351-9274. Pricing too low to advertise!
Warning California Proposition 65 Detectable amount of chemicals known to the State of California to cause cancer, birth defects or other reproductive harm may be found in pressure washing equipment, accessories and exhaust. For More Information Visit www.p65warnings.ca.gov
**This item is not eligible for free shipping. You will be contacted shortly after this order to discuss freight shipping charges.
HN Series - Hot/Cold/Steam Electric Powered Natural Gas Fired
3.8gpm @ 2500 psi, 250 degrees, 7.5hp, 208/230v, 3ph, 22amp, General Pump
Is your cleaning system ready to work anytime you are? With the HN series pressure washer, there is no need to light a pilot, refill the fuel tank, or hunt down a water hose. Simply set the switch to hot or cold and start cleaning. The low-speed belt-driven pump system is built for reliability. It also features a float tank and full pressure soap injection. The auto-ignition burner runs on natural gas or optional liquid propane to help keep the air clean. The open-frame design fully encloses the entire pressure washer and allows you full access to all components for efficient preventative maintenance. The stationary design and high output is ideal for in-plant cleaning, car or truck washing, maintenance yards, industrial applications, and equipment repair cleaning at a price that is less than you might expect.
Features
Ready to Work when you are
No need to fill fuel tanks or hunt down a water supply when machine is directly plumbed into natural gas and water lines. The pressure washer can be housed indoors, away from the elements, while locating the wash station remote outdoors.
Clean and Efficient Heating System
24v automatic electronic ignition on low emission natural gas burner. Liquid Propane conversion option is available on any model.
SpiraLast™ Coil
The coil is a Hydro Tek manufactured SpiraLast™ heating coil. Robotically fused ½” schedule 80 steel pipe is cold rolled to protect the steel pipe from fatigue and the spiral coil is then surrounded by ceramic insulation and stainless enclosure with double-wall end caps. Check out our lifetime coil warranty.
Belt Driven pump
Low RPM drive – cooler, quieter, continuous duty performance. These industrial triplex pumps feature ceramic plungers for long life. EZ Align™ pump rail system for belt tensioning with a simple adjustment bolt.
NEMA4 Water Tight Electrical Box
ETL certified to UL1776 Class 2 for use in wash-down area, exceeds industry standards. Special Hydro Tek control box features easy-to-use controls and provides instant access to electronics. Standard diagnostic indicators ensure optimal system performance. Dual voltage switch on most 230v models allows you to simply flip a switch to change to 208v power supply.
Bypass Cool System
Worry-free pump cooling system prevents pump from overheating with system designed pump bypass feature.
Durable Frame Construction
Welded, powder-coated steel, pro-tect-it frame for durability with rustproof stainless coil wrap and front panels. Stainless steel frame option as well as an option for stainless back and top panels available.
Best in Class accessibility
Open frame design gives you full access to all components, including EZ Align™ belt tensioning system, electrical box, and burner igniter for efficient preventative maintenance checks.
More Standard Features
- Detergent flow metering at full pressure
- Heavy-duty industrial motor with standard thermal overload protection.
- Adjustable temperature up to 250°F with steam setting
- Burst disc technology for operator safety
- Rustproof float tank to regulate incoming water ensuring consistent system performance
- Heavy-duty hose, wand, and trigger gun and quick connect nozzles
- Remote Ready: Choose an on/off timer remote option or a full-function remote option for complete control from the wash site.
*PRICING TOO LOW TO ADVERTISE ONLINE, JUST CALL IN 855-351-9274
**freight not included
HN Series: Stationary, Electric Powered, Natural Gas, LP or Diesel Heated | |||||
|---|---|---|---|---|---|
| Model | PSI | GPM | Temp | HP | Voltage |
| HN20004E2G | 2000 | 3.9 | 250° F | 5 | 208/230v 1ph 20a |
| HN25004E2G | 2500 | 3.8 | 250° F | 6.5 | 230v 1ph 29a |
| HN25004E3G | 2500 | 3.8 | 250° F | 7.5 | 208/230v 3ph 22a |
| HN25004E4G | 2500 | 3.8 | 250° F | 7.5 | 460v 3ph 11a |
| HN30004E2G | 3000 | 3.9 | 250° F | 8 | 208/230v 1ph 37a |
| HN30004E2C | 3000 | 3.9 | 250° F | 8 | 208/230v 1ph 42a |
| HN35005E3G | 3500 | 4.3 | 250° F | 10 | 208/230v 3ph 29a |
| HN35005E3C | 3500 | 4.3 | 250° F | 10 | 208/230v 3ph 29a |
| HN35005E4G | 3500 | 4.3 | 250° F | 10 | 460v 3ph 15a |
| HN35005E4C | 3500 | 4.3 | 250° F | 10 | 460v 3ph 15a |
| HN35006E3G | 3500 | 5.5 | 200° F | 15 | 208/230v 3ph |
| HN35006E4G | 3500 | 5.5 | 200° F | 15 | 460v 3ph |
Related Categories
Related Products
Reviews For: HN Series Hydro Tek Stationary Hot Water 3.8@2500 #HN25004E3G
I just ordered our 4th HN series pressure washer. This will be our first natural gas fired one, but I'm sure it will work just as well as our 3 other diesel fired washers. They are built to last! our first machine is almost 5 years old and it works and looks as well as it did they day we bought it. We work with asphalt and these pressure washer make light work of baked on asphalt on our machines and trucks. Highly recommended.